Skip to content
  • Free written quotes
  • Local crews
Cape Coral, FL (239) 555-0153
Surface cleaner leaving a clean stripe across a stained concrete driveway

Driveway washing in Cape Coral

Driveway pressure washing in Cape Coral

Clean concrete, pavers and sidewalks that have gone gray, green or stained. We match the pressure to the surface.

  • Concrete, pavers and sidewalks
  • Rust, oil and mildew treated
  • Written quote before work

Step 1 of 3

What needs cleaning?

What does driveway pressure washing involve?

Driveway pressure washing in Cape Coral removes the film that builds up on concrete and pavers over time. That film is usually a mix of mildew, algae, dirt and tire residue. A crew uses a pressure washer with a surface cleaner, which is a spinning bar that cleans in even passes. This avoids the stripes that a bare wand can leave behind.

For heavier stains, we pre-treat the spot with a cleaner and let it work before rinsing. We also clean sidewalks, curbs, entry walks, garage aprons and the concrete around a lanai or pool cage. If the walls above the slab are also green, our house washing service handles those, and the two jobs often go together.

What causes driveway stains in Cape Coral?

Cape Coral gives driveways a tough life. Warm, humid weather and frequent rain keep concrete damp, and damp concrete grows green and black mildew. Driveways under trees or beside a tall wall stay green longer because the sun cannot dry them.

Rust and irrigation stains

Some irrigation systems in Southwest Florida spray water that carries iron. It can leave orange stains on concrete, pavers and walls. These marks need a rust remover, not just pressure, and a few may fade rather than disappear.

Oil, tire marks and worn sealer

Cars drip oil, and hot summer tires can leave dark tracks. Paver driveways also lose joint sand over time, and weeds and moss start in the gaps. We tell you before we begin if a stain is likely to stay.

What changes the price of driveway washing?

We quote in writing, and the price depends on a few things you can see for yourself.

  • Size. A single slab and a long paver drive with a front walk are very different jobs.
  • Surface. Poured concrete, pavers and stamped concrete each need their own approach.
  • Stain level. Light green film goes quickly. Deep oil or rust takes extra product and time.
  • Access. Water supply, parked cars and tight gates all matter.
  • Extras. Sidewalks, a lanai floor or a pool deck add to the scope.

Send a few photos with your request and we can quote more closely. Be careful with any price that comes with no detail about what is included.

Most single-family driveways take a couple of hours, and sidewalks or a pool deck add more time. Larger paver areas can take longer. Plan on a half day for a full property of flat surfaces.

Here is how the visit goes:

  1. The crew checks the surface and walks you through the plan.
  2. Cars, planters and toys are moved off the area.
  3. Cleaner goes on and sits for a short time.
  4. The surface is washed in even passes and rinsed.
  5. We do a final walk-around with you.

You can usually walk on the surface once it is dry. Rinse water runs off, and we keep it away from storm drains and canal edges where we can.

When should I call for driveway pressure washing in Cape Coral?

Call when the surface looks gray, green or blotchy, when a damp slab starts to feel slippery, or when you plan to sell, rent or host an event. Many owners book once the wet season ends, but any dry week works. A clean driveway also stands out in listing photos.

Shop owners and property managers can read about our commercial pressure washing. For the full list of what we clean, visit our Cape Coral pressure washing home page. If you are not sure whether your surface needs pressure or a gentler wash, ask us and we will tell you plainly.

How it works

1

Send photos or request a visit

Tell us what needs cleaning.

2

Get a written quote

Clear price before any work starts.

3

We clean and tidy up

Rinse, check and leave the site clean.

Free written quotes
Local crews
Safe soft-wash methods
Fast scheduling

Request driveway cleaning

Tell us what you need and we call you back.

No obligation.

Step 1 of 3

What needs cleaning?

Questions about pressure washing in Cape Coral

Can pressure washing remove rust stains from my driveway?

Often, yes, but pressure alone will not do it. Rust marks from irrigation water need a rust remover applied first and then rinsed off. Older or deep stains may lighten without vanishing. We will look at the marks, tell you what is realistic and quote for that work. Fixing the sprinkler heads that spray the slab stops the stain from coming straight back.

Is pressure washing safe for pavers?

Yes, when it is done with care. Too much pressure close to the surface can blast sand out of the joints and etch the paver face. A surface cleaner and the right tip keep the pressure even. After a wash, some joints may need new sand, and you may want to ask a paver specialist about sealing.

How often should I wash my driveway in Cape Coral?

Most owners do it about once a year. Shaded driveways, driveways near canals and driveways under trees may need it sooner because they stay damp. If it starts to look gray or green, or feels slick after rain, that is your sign. A regular schedule keeps each job lighter.

Will you wash the sidewalk and curb too?

Yes, we can include the sidewalk, curb apron, front walk and the concrete around a lanai or pool cage in the same visit. Tell us about all the areas when you ask for a quote, so the written quote covers everything and there are no surprises on the day.

Do I need to be home while the driveway is washed?

You do not have to be, but it helps if you are home at the start and end. Move the cars, bikes and planters beforehand and tell us where the outdoor tap is. If you are away, leave gate access and let us know about anything we should avoid.

Ready when you are Call now or request a quote online. Call for a free quote Get my free washing quote (239) 555-0153